「PISTON HEAD/ TM FN 5-7」
PRODUCT CODE:646507
X-FIRE Logo

ピストンヘッド TM FN5-7

For Tokyo Marui FN5-7.
When capacity of the cylinder has been increased & new cylinder diameter was adopted, PDI manufactured new one because it become impossible to correspond in the past one.
Made of delrin ,CNC all machined.

It can put out a steady output regardless of whether to have the HOP.
The output shows the tendency to go up regardless of whether to have the hop. ※The all cannot be guaranteed.
Under this, there is a result of our test. ※0.2g, room, Only the piston heads are exchanged.

USE STD PISTON HEAD
USE PDI PISTON HEAD
HOP min
HOP max
HOP min
HOP max

average 220.60 f/s

average 225.45 f/s
average 224.15 f/s
average 235.75f/s
67.26 m/s
68.73 m/s
68.34 m/s
71.88 m/s
0.45 J
0.47 J
0.47 J
0.52 J

When the piston advances, the effect of the seal is demonstrated
The difference point with a past series is the seal is not done until A advances.
Please note that you cannot sealcheck by the manual operation.

There is no version in winter
There is no version in winter (The thicker one). Because it becomes impossible to build piston into cylinder when thickening it any further.

Sale \ 838
We deem to get your agreement for the below policy when you place an order.
Qty:

Please read the below policy
We deem to get your agreement for the below policy when you place an order.
○We couldn't assure the trouble with your lack of skill.
○It may be required to adjust to fit because our custom parts reduce the clearance of normal parts to lead the best condition.
○Do not use the 3rd party products.Because we design with Normal parts or PDI-products.
 If you ignore our rule & breake up your guns、we couldn’t be responsible.
○It is possible to change the spec or design.