「RAVEN CYLINDER SET/ TM L96 AWS」
PRODUCT CODE:647351
X-FIRE Logo
ブルバレルベース

For TM L96 AWS.

PDI New brand "RAVEN"
PDI's new brand "RAVEN" appears.
The black body is cool-looking.
RAVEN offers reliable quality and reasonable price!

New design and new material!
TM L96 raven cylinder is the first step of "RAVEN".
It is made of CS, and it is given QPQ treatment.

Cylinder set for TM L96 AWS.
It includes "Cylinder" and "taper cylinder head".
*You can use it with original piston, but It is originally for the PDI piston.

「Quality control is perfect」 Reduce torelance per lot,so fit any lot easily.
Made of STKM-13C but specialized for PDI.
Keeping torelance around ±0.01mm , really tight setting.
So our material is reliable making the best cylinder.



The laser stamp is given by KEYENCE 3 AXIS YVO4


The laser stamp is given to out-of-sight place at normal times.

The cylinder and cylinder boss are united by φ3mm parallel pins and YAG laser.

Cylinder head is made of CS.
The cylinder head is given QPQ treatment same as cylinder.
the taper angle can blow off air effectively.

96アドバイス
When you set PDI precision cylinder for TM L96, you should take care of these points.

1.L96-59(cylinder support ring / from the TM L96 manual)
Because precision cylinder is bigger than original one, when you set precision clinder, you should remove the support rings.
As a result, there is a possibility that the surface of the cylinder is damaged.
If you do not want to damage the surface of the cylinder, you should polish the inside diameter of the support ring with the file.
SUPPORT RING

2.L96-58(barrel base inner / from the TM L96 manual)
We recommend you to polish inside of barrel base, because it made by zinc die-cast, and the inside surface is not smooth.
亜鉛

When you customize it, there is a possibility that you can not cock.
Please note the following points when solving it by using pure parts.
1.Angle of setpin and SP guide.
2.Attrition of piston end
3.Attrition of cylinder inside.
There is a possibility of solving it when these are corrected.

 
 

Please read the below policy
We deem to get your agreement for the below policy when you place an order.
○We couldn't assure the trouble with your lack of skill.
○It may be required to adjust to fit because our custom parts reduce the clearance of normal parts to lead the best condition.
○Do not use the 3rd party products.Because we design with Normal parts or PDI-products.
 If you ignore our rule & breake up your guns、we couldn’t be responsible.
○It is possible to change the spec or design.