M24x Upper Set

Now we are making out the M24X-2006 upper receiver-set.
The spec is almost same as M24X-2006 which we sold before.Please use the stock of PDI's M24 or Classic army's M24.
The below is this spec.
Stainless Cylinder,Stainless handle,Variable HOP UP Chamber,Vacuum piston , Stainless Spring guide , Taper cylinder head , ν-trigger(M24 specialized) , Outer Receiver(one piece model) , Mount base , 01 Inner barrel ,
※No scope,.

For overseas,we we set the output level to 1.99J.So it's very powfull tune. If you want lower power,we could exchange the springs,please ask us(to ask@x-fire.org)

「M24x Upper Set」 Pre-order

Now we are making out the M24X-2006 upper receiver-set. The spec is almost same as M24X-2006 which we sold before.Please use the stock of PDI's M24 or Classic army's M24. The below is this spec. Stainless Cylinder,Stainless handle,Variable HOP UP Chamber,Vacuum piston , Stainless Spring guide , Taper cylinder head , ν-trigger(M24 specialized) , Outer Receiver(one piece model) , Mount base , 01 Inner barrel , ※No scope,. For overseas,we we set the output level to 1.99J.So it's very powfull tune. If you want lower power,we could exchange the springs,please ask us(to ask@x-fire.org)

Palsonite-processed Stainless cylinder & Handle We take care of the tolerance of the Cylinder diameter,so we use the best quality SUS.This tolerance is ±1/100mm.This is better than other company's inner barrel tolerance ! And put the 2-parallel pin(4mm) into the body & boss,after that,we welded that line by laser welded machine. This sales point is stroke range.We adapt the long stroke as well as APS-2,and capacity is VSR-10 Bore up size(25mm)..That's the largest capacity in the airsoft guns.

HOPChamber + 01 Inner barrel This model is for M24X only.Installed the 2 bar could adjust the direction more. And 01 inner barrel has a tight diameter,6.01mm and tolerance is ±0.002mm.Of course we make out with SUS304

And other Taper cylinder head & Spring guide are made of SUS.The piston is coiced the Vacuum type & made of Duralmin.
Outer receiver This is the one piece model barrel from receiver to the barrel top.It's made of the all machined Duralmin.The width of the mountbase is 20mm.Also,It's all machined as well as the receiver.
νTrigger This trigger system is similar to VSR-10 system.It's very hiigh durability cause we use the iron,Sus & duralmin as the material.
Price 103,250 Yen