「Palsonite Cylinder / M24」
PRODUCT CODE:645814
X-FIRE Logo

We adapt new technology of 01&05 barrels called "cold hammering" .The inner diameter torelance is 1/100mm.We have never seen as this accuracy torelance of this cylinder.
And it's processed the "Palsonite" to increase the surface hardness. It would be more tough against the scratchs.
Besides,it would reduce the friction factor.

※ For PDI (or Classic Army)M24.This is not for M24X cause that's outer dia.of cylinder is 22mm.
The welded points (IMG is Polished Type)
We welded the cylinder some points.Actually,our cylinder had a really durability,compared to others.But we add "welded process" to be more tough cylinder.
1:The shaft & End Boss(a pink point)
2:The boss & Body(a red point)
3:To Combine shaft & boss(a red point)
These pictures are type of APS-2
APS-2 シリンダーセット APS-2 シリンダーセット
   
4-parallel Pins
Around the body,Diameter 3mm,(Please watch the above picture.It's a green point)
4-Parallel Pins is knocked the body to prevent from falling off.
 
Sale \ 19,740
We deem to get your agreement for the below policy when you place an order.
Sold Out!

Please read the below policy
We deem to get your agreement for the below policy when you place an order.
○We couldn't assure the trouble with your lack of skill.
○It may be required to adjust to fit because our custom parts reduce the clearance of normal parts to lead the best condition.
○Do not use the 3rd party products.Because we design with Normal parts or PDI-products.
 If you ignore our rule & breake up your guns、we couldn’t be responsible.
○It is possible to change the spec or design.