VACUUM PISTON / APS-2

「 VACUUM PISTON / APS-2 」
PRODUCT CODE:631237

For APS-2,TYPE96,M24 ( PDI & Classic army ).
Head & Body are made of Duralmin & End is stainless steel to get highly durable.

If use this piston with type96,please cancel the cocking indicator.

※If use this piston to extreme power spring as PDI SS,SPR & over 2J setting,it's possible to be shorter life.
Because those sprigns gives extreme power over Toy. It's up to your operation & maintenance.

Please note; We developed this piston for PDI Cylinder,so if use original cylinder,they may not be fit.

Internal Diameter is 13.4mm (For larger Dia.Spring)

Vacuum system is to let fly at BB more farther and go straight.
This system erase the negative pressure when shooting.The system is inside the head.

1.Conventionally,the valve is free in the system.(This is not air sealing)
2.When shooting,the piston go ahead.At that time,The valve closed & start to keep air sealing.
3.As well as the piston bump against the cylinder head,the valve come off.
4.The air flows toward top from rear.This cancel the negative pressure.

★Sale \ 6,738
We deem to get your agreement for the below policy when you place an order.

【Notes regarding CA M24!】
It has been confirmed that CA (Classic Army) M24 has M4 screws instead of M3 to attach the receiver and trigger box.
Depending on the lot it may not be possible to install it, so be sure to check your CA M24 before purchasing.

Since Classic Army's products undergo design changes frequently, there is a high possibility that the parts we handle might not compatible.

※We are unable to check the lots of CA M24 or if your rifle is compatible.
※Items purchase cannot be returned as they removed out of the package.

Please read the below policy
We deem to get your agreement for the below policy when you place an order.
○We couldn't assure the trouble with your lack of skill.
○It may be required to adjust to fit because our custom parts reduce the clearance of normal parts to lead the best condition.
○Do not use the 3rd party products.Because we design with Normal parts or PDI-products.
　If you ignore our rule & breake up your guns、we couldn’t be responsible.
○It is possible to change the spec or design.